Featured
Replace Braun Oral B Battery
Replace Braun Oral B Battery. Type number shown on a vitality sonic type 3737 toothbrush. Even if the replacement battery is already fully charged, the toothbrush will fail to power on if you don’t recharge the toothbrush.

For other type numbers, makes and models the toothbrush opening and battery replacement procedure is different so please see our other guides to toothbrush battery replacement for these toothbrushes. 2) using a small adjustable spanner place this around the flat of the white plastic part of the toothbrush as shown and twist the spanner anticlockwise. These include the professional care, pro and trizone 600, 1000, 2000 and 3000 model names, and others.
1) Remove The Brush Head.
1.3 make sure the area is clean and dry. 1.1 choose your ideal brush head. On the back of the charger there is a tab that lets you pop off the bottom of the toothbrush and recycle the battery.
Now Turn The Assembly Over And Remove The Spring Located Between The Battery And The Motor.
This spring is 20 mm long in models that came with a 42 mm long battery, and 13 mm for those that came with a 49 mm long battery. 3) after twisting about 30degrees the white plastic should disengage from the main body of the toothbrush. For other type numbers, makes and models the toothbrush opening and battery replacement procedure is different so please see our other guides to toothbrush battery replacement for these toothbrushes.
The New Battery And The Base Removed.
Put the toothbrush top down on a hard surface and push the inner part out. 1.5 test the toothbrush after connection. The battery in this model is the same size as a standard aa cell (50mm long x 14mm diameter.) so you have a wide choice of replacement cells.
These Include The Professional Care, Pro And Trizone 600, 1000, 2000 And 3000 Model Names, And Others.
Make sure you take note of the original position of the battery you’re removing so you can replace it in an exact manner. The tutorial is based on the type 3756 toothbrush but also applies to type 3754 toothbrushes. Press the quick release button on your oral b toothbrush to dislodge your head from its base unit of connection to the toothbrush.
Pull The Head To Remove It From The Base Of The Toothbrush.
2) using a small adjustable spanner place this around the flat of the white plastic part of the toothbrush as shown and twist the spanner anticlockwise. Years of use can be seen here! Make sure you don’t over bend it.
Popular Posts
Motion Sensor Outdoor Light Battery Operated
- Get link
- X
- Other Apps
Comments
Post a Comment